For a Curt Friction Sway-Control Bar like # 17200 or the Reese # 83660 you can use the Replacement Ball and Plate Assembly for Curt Friction Sway Control System # C17201. This will include the frame ball and hardware as well as two clips. The clips are not available separately.
Spring Clips for Hitch Pins like # 337HP9 will work for that application as well even though the styles are different. view full answer...
I spoke with my contact at TruXedo and they informed me that 035639607 is a serial number and it relates to the TruXedo Lo Pro QT Soft Roll-up Tonneau Cover part # TX571801 which is a fit for a 2014 - 2018 Chevrolet Silverado/GMC Sierra 1500 with the 5-1/2' bed.
If you need any replacement parts for this cover then please let me know what that is and I would be happy to help. For example, the correct replacement tarp is the Replacement Cover for TruXedo Lo Pro QT Soft, Roll-up Tonneau... view full answer...
The correct replacement bracket kit for your Aries Grille Guard # AA4084-2 is the Hardware Kit # AABRKT-4084. This includes all the necessary mounting brackets and hardware for installation.
The Bracket Kit # AABRKT-4067 that you referenced is for a different grille guard and it will not fit your existing grille guard or your GMC Sierra. view full answer...
The Trailboss fifth wheel hitch you have is designed to fit industry standard fifth wheel rails so for a rail kit that is compatible with it and your 2017 GMC 1500 5-1/2 foot bed you'd want the # RP50064-58 which is a custom install kit. Custom kits are much easier to install as they minimize drilling and install time.
Since you have such a short bed you will need to replace your current pin box with a Sidewinder so that you can make tight turns without interference.
You will need to... view full answer...
I was able to get in touch with my contact over at Extang and they confirmed that you can use the # EX43445B as the replacement cover for your original Extang Trifecta tonneau cover. view full answer...
GM actually uses the # HM40975 as the OEM trailer connector, so that's what I'd recommend you use. The connector will plug into the socket located above the spare tire. You'll need to free the connector from the frame member and uncoil it so it will reach the rear bumper.
The truck is indeed pre-wired for a brake controller. To complete the installation, you'll need brake controller and the vehicle-specific wiring harness. I'd highly recommend the Tekonsh P3, part # 90195. The P3... view full answer...
The Replacement Rubber Block for Base Rail Installation of TracRac Sliding Ladder Racks - Qty 1 # TARB-11032-1 is the correct replacement for the TracRac SR Sliding Truck Bed Ladder Rack w/ Over-the-Cab Extension # TH43002XT-782EX. This replacement block does not include any hardware.
If you need the hardware, you'll also want Hardware Kit # TAHD-21501. view full answer...
No, the 2015 GMC Sierra 1500 did not come with the temperature sensor in the passenger's side mirror. The temperature sensor is only present on models with the V8 Duramax engine from 2014+. Since the 1500 models did not come with the Duramax engine you do not have this sensor. Therefore, if you are looking for a set of replacement towing mirrors then the K-Source Custom Extendable Towing Mirrors part # KS62135-36G would work well for you. view full answer...
I reached out to Fastway and they do not have replacement hitch balls for the Self-Locking, Adjustable 2-Ball Mount # DTALBM6600-2S. So when the hitch balls wear out you will have to replace the entire assembly. There is no way to use with a single hitch ball versus the 2 ball included mount. view full answer...
The replacement hardware for the Westin Sportsman Grille Guard # 40-3695 on your 2014 GMC Sierra 1500 can be found with the part # 40-369PK. This includes all the necessary hardware to mount this particular grille guard to your Sierra. view full answer...
I can certainly point you in the right direction. When replacing an equalizer we want to keep it as close to the stock size as possible. There is a small amount of tolerance, but not much. The Dexter easy flex # K71-653-00 i'm afraid is going to be too big to fit correctly into your suspension.
If you want to do an equalizer upgrade, I recommend the Road Armor Shock Absorbing Equalizer # LC696740. This measures 6" long center hole to center hole, and 3-1/4" tall. This will be much closer... view full answer...
I contacted Westin and the mounting kit/hardware for their # 28-51035 R5 Nerf Bars is not available separately at this time. The only thing we could do to replace it would be a full replacement of the entire system, unfortunately. view full answer...
I spoke to a representative for Extang today. The tonneau cover you have installed on your 2012 Ram 3500 with the 6.5' truck bed is the Extang Trifecta Signature Soft Tonneau Cover - Folding - Canvas. Extang's representative told me that the replacement tarp for this cover is no longer available, since September of 2021.
As a result, you will have to replace the tonneau cover. The replacement model is the Extang Trifecta Signature 2.0 Soft Tonneau Cover - Folding - Canvas, part # EX94430.... view full answer...
If you have the Thule TracRac SR Sliding Truck Bed Ladder Rack part # TH43002XT-782 on your 2015 GMC Sierra 1500 which is for a 5-1/2' long bed then you will need the Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks part # TH21782 but if you have the Thule TracRac SR Sliding Truck Bed Ladder Rack part # TH43002XT-781 on your 2015 GMC Sierra 1500 which is for a 6-1/2' long bed then you will need the Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks part # TH21781. view full answer...
Most of the hubs/drums that we offer for 3500-lbs axles, like the # AKIHUB-545-35-G-EZ-K, have 1/2" lug studs and require 1/2" lug nuts like the CE Smith Trailer Wheel Lug Nut # CE11051. In order to find the correct replacement lug nuts for your hubs, I would recommend measuring the lug studs with a dial or digital calipers to make sure that you're getting the correct size. view full answer...